It’s the first month of the New Year. You’ve just made a New Year’s Resolution: to learn a new skill. If it were about roofing, then knowing the basic roof replacement steps will help you save money and learn hands-on industrial knowledge.
True enough, learning how to roof a house in Branford CT will pose a challenge. However, it is the best point to begin roofing for beginners. Once you’re familiar with all the roofing basics we listed here, you’ll learn how to reshingle a roof, remove clay tiles, or even dislodge aging metal roof sheets in no time.
A Comprehensive Guide to Roof Replacement:
- Equipment and Roofing Material Checklist (5+ Items)
- DIY Roof Replacement Steps (7 Steps)
- When Should You Hire a Professional Roofing Contractor?
For this guide, we’ll use an asphalt shingle roof to tear off and replace. Indeed, roof replacement steps for other roofing materials will parallel this guide on asphalt shingle roof removal and reinstallation.
The average Branford CT residential roof size is at 2,200-3,000 square feet. Therefore, any house in excess of 2,500 square feet must have enough asphalt shingles to cover the roof deck. Fortunately, most hardware suppliers can prescribe a number of asphalt shingle bundles and even give you discounts for your multiple purchase.
After securing your roofing material, it’s time to get the following equipment to tear off and follow the roof replacement steps we listed below this section.
- Roofing Hammer
- Roofing Shovel
- Pry Bars
- Framing Square
- Caulking Gun
- Chalk Line
- Tin Snips
- Hammer Tacker
- Power Nailer
- Lawn Rake
- Push Broom
- Construction Shovel
7 DIY Roof Replacement Steps
With all the materials needed for roofing a house secure in your storage, you can now begin with the first of all the roof replacement steps.
However, before you start, make sure you’re working with another individual or a team. DIY roof replacement will take time and multiple weekends. Therefore, you can shorten the work period, improve your roof replacement results, and reduce stress by having a team work with you.
Full Property Protection
Any experienced contractor knows that tearing off and replacing roofs is a messy job. In fact, the scraps and debris can stain the siding or damage the lawn of your property.
Therefore, they use tarpaulins and protection plywood structures to prevent any possible property damage. Following this practice, we advise you do the same.
You may need to buy about 3,000 – 5,000 square foot of tarpaulin, a bag of nails, and plywood to create these protective structures. Then, you can use the hammer tacker to staple the tarps in place.
Make sure to cover all areas where siding and the nearby lawn expose themselves. If you have immovable fragile structures such as pipelines beside the home, create plywood structures around them for optimum protection.
Removing Old Roofing Material
Use a construction ladder to head up to your roof. Furthermore, secure your equipment belt in place. Then, carry your pry bar, tin snips, roofing hammer, and roofing shovel up the roof.
Next, use the pry bar to lift up your old shingle roof material. Then, lift it up slowly until the nails start to loosen. Remove the pry bar then use the nail extractor of the roofing hammer to remove the long nails holding the asphalt shingles in place.
Perform the same steps until you have removed all old asphalt shingles from your roof. If you’ve placed enough tarp around your home, you can throw the old materials down the ground. In doing so, you prevent a messy roof tear-off workplace.
Roof Deck Inspection and Reconstruction
A 20 to 40-year-old home will require roof replacement steps over time. You’ve just finished removing all the old roofing materials. Now, you need to inspect the wood decking before you bring bundles of shingles and replace your old roof.
Look for moist and rotted wooden parts. Then, remove these old wooden decks and replace them. Creating a solid structural base for your roofing materials is essential.
Once you’ve repaired the roof deck base, take a bag of nails and your power nailer to nail each new board in place. Some contractors tend to forget or never hammer new nails into the new decks. Therefore, always keep this part in check before installing your new roof.
Aside from the roof deck, check the following areas for any damage. Make it a point to replace them as well:
- Drip Edge
- Ice and Water Shield
- Roof Felt Underlayment
The drip edge is a metal bend that prevents rain from going to the underside of your asphalt shingles. In turn, it prolongs the lifespan of your roofing material, deck, and underlayment
Waterproof and ice-proof underlayments are special materials that prevent water permeation. Then, it leads escaped water to the drip edge for proper disposal.
Your roof felt underlayment has a lifespan of over 15-30 years. Therefore, it is essential to replace them when you have to replace your entire roof. Additionally, they’re useful for using chalk lines to position your asphalt shingle installation accurately.
Placing The New Roof
Asphalt shingle roof installations are easy DIY projects. Take a bundle of roofing shingles. Then, use your saw to cut series starters by 1/4, 1/2, 3/4, and so on. In doing so, you begin the overlapping series you most often see in Branford CT homes with asphalt shingle roofs.
True enough, a number of series installation methods exist for asphalt shingles. You can install them in a horizontal-and-vertical manner to provide optimum leak and hailstorm resistance.
Cleaning Up The Work Area
Every single day after finishing work, make sure to clean your work area consistently. In doing so, you prevent confusion and possible accidents during your next construction day.
This is where the lawn rake, push broom, and construction shovel comes into play. Use them to clear debris and old roofing materials from your roof and lawn. Lastly, make sure to dispose or leave the material where they can do the least harm or obstruction.
After finishing your asphalt shingle replacement, you’ll want to make sure you did it correctly. Check each area for possible water permeation or unevenly-spaced asphalt shingles.
In addition, check if you properly installed metal flashings against roof structures such as chimneys or skylights. Improper flashing installation can lead to possible leaks and shortened roof lifespan and durability.
When Should You Hire a Professional Roofing Contractor?
DIY roof replacement steps can be hard work. It can take about 5-6 weekends or even more to re-roof your roof completely.
Therefore, you’ll lose weekends where you can relax and rest. If you feel this way and believe you can manage your weekend time better, then you can call on professional roofing contractors instead.
With professional roofing contractors such as Amity Home Maintenance Solutions, you’re guaranteed precision roofing tear-offs and replacement. Furthermore, the contractor’s years of experience and knowledge of roofing guarantees the longevity and durability of your roof.