If you look at any home in Branford CT, you will notice that almost every one of them have gutters. What you’d never see is anyone making a DIY gutter guard for their property. It’s expensive, but professional gutter installation with a good gutter guard service is a good long-term investment.
Gutter guards prevent debris, leaves, and twigs from clogging up the gutter system. Fortunately, it’s easy to create your own DIY gutter guard.
What’s more, after reading this post, you will:
- Know the steps to create your own gutter guards
- See if gutter guards really work
- And the advantages this small system brings to any home
Things You’ll Need
Before starting on your DIY gutter guard project, you’ll need to shop around and find the following materials and tools. In doing so, you guarantee a fast and hassle-free assembly of your new gutter guards.
Additionally, include in this list the cost-free principle that will help you avoid headaches: practice safety first!
- Wire Mesh
- Spray Paint (optional)
- 1″ Nails and Washers
- Electric Drill
- Step Ladder
- Tools Vest
- Screw Drivers
Five Steps to Create Your Own DIY Gutter Guard
Once you have secured every single item above, it is time to create your own DIY gutter guard from scratch! Here are the steps to proceed.
Cut Rolls in Half
The hardware store often sells wire mesh in 100-foot aluminum rolls with an 8-inch width. You can ask them to cut the material into four-inch wide rolls from the store. Alternatively, you can do this yourself at home using the hacksaw.
Some hardware stores sell wire mesh cut in 4×8 foot sheets. This makes your job easier because you will need four-inch wide strips to create your gutter guards.
To determine how much you’ll need, follow this rule: each 100-foot roll covers 200 feet of gutter. Therefore, a 100-foot aluminum wire mesh roll will do nicely for an average-sized home.
Improve Rust and Oxidation Resistance
The optional elastomeric or acrylic spray paint we mentioned earlier is a good option if you want to improve the lifespan of the wire mesh. Aluminum wire mesh will not require spray painting because of their natural rust and oxidation resistance.
However, galvanized or galvalumed metal will have better longevity with acrylic or elastomeric protection. In contrast, take note that these paints will cost quite a bit, and you’ll need proper equipment to paint the wire mesh properly.
Nail it Well
You will need to secure the mesh to the roof of the Branford CT house. At this point, use the nails and washers to do this. Place a washer in between the hammerhead and the roof surface to prevent tensile damage. Then, hammer down the nails.
Make sure to give an 18-inch width between each nail you hammer to your roof. In doing so, you secure the gutters and prevent it from dislodging during storms. Take note that you are hammering on the edge right above the fascia and not the roofing material
Use the electric drill and place a self-drilling screw to attach the wire mesh to the outer edge of the gutter.
Always overlap the wire mesh pieces by 1-2 inches to prevent any debris from entering the gutter system. Check your overlaps often and avoid stretching the wire mesh where unnecessary.
Things to Avoid
Never nail the wire mesh onto the shingles or roofing material of your property. As soon as you do so, you decrease the quality of your roofing material. In addition, this holds true for metal shingles even if they are tough and durable material.
Lifting the Shingles
Similar to shingle nailing, it compromises the capacity of your roof to prevent leaks and other possible rainwater damage.
Poor Downspout Protection
The downspouts deliver your rainwater straight to the gutters. In fact, they’re the first gutter system spot to get clogged. In this light, make sure to create ample protection for them as well.
Do Gutter Guards Really Work?
A DIY gutter guard will work if you construct and install them properly. These five steps guarantee you will have less time to clean your gutters after a rainstorm.
In this DIY system, your wire mesh acts as a filter that prevents foreign objects from entering your gutter guards. If you create a wire mesh and micromesh dual-layered system, you prevent even the tiniest dust and soil from entering your gutter system.
If you do not want to create a DIY gutter guard, you can buy different gutter guards in the market. However, DIY wire mesh guards are effective because they prevent leaves, debris, and even small animals from entering and clogging your gutter system and downspouts.
Why Do You Need Gutter Guards?
Less Gutter Maintenance
You won’t have to climb back up your roof, don your gloves, and clean out your gutter if you have an excellent DIY gutter installed.
Prevent Property Foundation Damage
Gutters prevent water from overflowing into your yard. A soaked yard will weaken your basement structures. Additionally, the internal flooding this will cause will flood your basement and decrease the durability and stability of your property.
Avoid Flooded Yards
A gutter system in excellent condition will improve your property aesthetics with a properly cared-for yard, improved vegetation, and excellent yard condition. Additionally, you spend less in renovating your yard every single heavy rainstorm.
Improved Curb Appeal
Gutter overflow will splash against the siding of your property. Because these carry debris and dirty materials, they will stain your property sidings and require extra maintenance. If you’re putting your Branford CT property up for sale or love to keep the property appearance in its pristine condition, you need properly-working gutters.
A DIY gutter guard is definitely an inexpensive way to improve the condition of your gutters and save money in the process.
Making a DIY gutter guard is easy. If you assemble your gutter guards properly and install it as we instructed here, then you’ll never have to worry about the condition of your gutter guard ever again.
However, in the event your gutter guards fail leading to massive property damages, do not hesitate to call professional contractors to help you.